Free INCRA Project Plans plus $60 Router Fences & More

Its amazing that such a simple, inexpensive tool can so profoundly broaden your shops capabilities.Use it on your router table to get more accuracy for everyday work and to explore an endless range of box joints and dovetails or use it at any machine in your shop that would benefit from an accurate, repeatable fence positioner.INCRAs patented incremental racks mesh each time the clamping knob is tightened, causing the fence to mechanically snap to the dead center of the closest 1/32 with an accuracy of +/-0.002 and perfect repeatability.Includes a 3/8 box joint template, a 1/2 dovetail template, and a 1-hr online instructional video.Pick up the Master Reference Guide for even more joinery variety and add the Incra Jig Fence System to get up and running even faster.Made in USA.

Apply Coupon Code JG321 during checkout.

This fence system is the ideal companion to the Original INCRA Jigs and a huge time saver.All the fence components needed to produce box joints and dovetails are included, as well as hardware and information for creating even more accessories.The 20"-long, laminated MDF fence is machined with a front T-slot and a 1-1/4" wide x 1" high router bit opening, and hardware and instructions provided for shop-made wooden sub fences that allow larger cutters and a variable-size router bit opening.The sturdy aluminum right angle features plenty of T-slots in the faceplate for adding backing boards or other fixtures for specialized work.The double-laminated fence stop reliably limits the length of the cut when dovetailing or when doing trapped drawer and box bottoms.Save yourself a ton of time getting your INCRA Jig into service!Made in USA.

Apply Coupon Code JG321 during checkout.

The thin 3/32 kerf TS2000 is a great choice for increasing feed rates & reducing feed pressure when cutting thicker lumber or using a less powerful table saw pushing a narrower blade through the wood just takes less power.The TS2000 sets the standard for general-purpose blade performance super smooth rips and crosscuts in solid lumber up to 2 thick, splinter-free cuts in plywood, and even basic joinery. Yes, there really is a difference between premium blades like Ridge Carbide & Forrest over the blades sold in big-box stores.10 x 40T alternate top bevel grind w/ 8 flat raker teeth, 3/32 thin kerf, 5/8 arbor. Made in USA.

Apply Coupon Code RCT15 during checkout.

The new 60-tooth version of the tried-and-true TS2000 is the ideal tool for extended crosscutting jobs in solid lumber and for ripping & crosscutting chip-prone sheet goods.Are you using an INCRA miter gauge or sled to produce parts for frames or segmented turnings?Start here!The shallow +5 rake makes it gentle on veneered plywood, too, plus its razor-sharp with the carbide tips faces and tops polished to 1200 grit.The 1/8 kerf and 0.087-thick body make the TS2000 stiffer than thin kerf blades to improve your saws accuracy.10 x 60T alternate top bevel grind, 5/8 arbor. Made in USA.

Apply Coupon Code RCT15 during checkout.